Shop All

A very effective, good-smelling, non-flammable solvent for removing wax, beach tar, grease and oil. Will leave your board clean and dry unlike the other wax removers in the market that leave a slippery film behind!

Directions for use:
If removing heavy wax buildup, allow the sun to do most of the work for you.

1. Put your board in the sun until the wax softens or liquifies.
2. With wax comb, scrape off the majority of the wax.
3. Apply liberally onto the board and let it sit for a few seconds.
4. Wipe with a clean cloth , turn over frequently.

Get everything you need for nearly any type of surfboard repair with the Solarez Polyester Pro Travel Kit. Specific to boards made with polyester foam, the Polyester Pro Travel Kit ensures you won't be caught high and dry because of a gnarly ding. Packed neatly in a travel friendly, crush-proof box, the Solarez Poly Pro Travel Ding Repair Kit has resin, cloth and an array of repair accessories that will make the job a breeze. Stock up on the Pro Travel Kit, hone your skills and you will never be out of the water for long again.

Features

• 4 oz "dual-cure" laminating resin
• 2 oz tube Solarez fiberfill putty
• 2 oz tube Microlite putty
• 5" x 5" sandpaper in 60, 150 and 320 grits
• Spreader
• 1 oz bottle of acetone
• 200 square inches of 4oz S-glass
• 38" fiberglass rope
• High-quality stainless steel scissors
• Masking tape
• Catalyst
• Mixing cup
• Stirring sticks
• Razor blade
• Clean-up pads

Get all the basics for your surfboard repair with the Solarez Epoxy Pro Travel Kit. The Solarez Epoxy Pro Travel Ding Repair Kit uses epoxy resin which will work for surfboards made with either epoxy or polyester foam so you can fix all your boards with just one kit. Packed neatly in a travel friendly, crush-proof box, the Epoxy Pro Travel Kit has resin, cloth and all the basics to get you and your board back in the water.

Features

• Zerovoc ® Styrofoam-safe UV cure resin
• 2 part epoxy resin for internal structural repairs
• Solarez Microlite-Epoxy for foam repairs
• Fiberglass cloth
• Rope
• Stainless Steel scissors
• Sandpaper
• Eco-Friendly clean up solvent
• Applicators

Same great resin as the UV-Cure Polyester except designed to cure well in winter months or in areas far from the equator.

Epoxy Microlite now gives you the option of repairing those larger dings in your Epoxy Surfboard or SUP. This product works well and is compatible with all EPS or Polyurethane Cores. It is UV Cure and like all of the Solarez products can be catalyzed if necessary. 
This product dries white and and glossy. It is easy to sand and dries quickly. 

What is Solarez Microlite Dual Cure Epoxy? 
It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair all types of surfboard foam, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. Or, it can be cured by MEKP atalyst for repairing deep cavities, fin plugs or fin box foundations and other internal structural fillings. It sands and fairs very nicely, making it an easy one-step repair for most any ding. 

Instructions

UV-CURE (for superficial dings less than 1/4" deep) 

• Apply in the shade. 
• For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board. 
• Expose to sunlight for 3 minutes 
• Peel off plastic wrap and touch-up sand. 

DUAL-CURE 
1) Into a mixing cup, squeeze out enough Microlite to fill the ding cavity and add 2% Methyl Ethyl Ketone Peroxide (MEKP) catalyst. 
Mix well. 
2) If your ding is very deep, apply a thin layer (1/16") of Microlite all over the interior of the ding. Cure it in the sun for a couple of minutes. 
3) Pour the mixture into the ding cavity, cover with a clear plastic sheet. 
4) Expose to sunlight. The compound will cure throughout in approximately 5 minutes